About This

• Two-part epoxy paste to replace missing or rotted wood is resistant to dry rot UV light and fresh and salt water
• Can be used in indoor and outdoor applications with an application temperature range of 35 to 115 degrees F and a service temperature range of -20 to 200 degrees F
• High tack helps reduce drips and sags while hardening
• PC-Woody part B must be mixed with PC-Woody part A in equal volumes on a flat surface with a stiff putty knife; DO NOT ATTEMPT TO MIX WITH GLOVES
• Not recommended to mix PC-Woody in teaspoon size increments or smaller simply because of the likelihood of an ‘off-ratio’ mix
• Provides work time of 30 to 40 minutes (at 70 degrees F) to allow for adjustments
• Can be painted stained and machined after fully cured
• High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag
• Excellent resistance to all weather elements dry rot UV light fresh and salt water and chemicals present in pressure-treated wood
• Note: PC-Woody will not bond to wax paper Teflon Polyethylene and some other plastics Test a small area when in doubt

Overview

• Brand : PC Products
• Material : Epoxy Resin
• Item Form : Gal,Paste
• Special Feature : High Tack, Weather Resistant, Non-bonding to Certain Plastics, Paintable, Stainable, Machinable
• Color : Tan